8400-B001系列踏板称重传感器，用于踏板操作力

• Features

  • 非常扁平的设计
  • 对作用于运行方向的力不敏感
  • 易于更换，符合人体工程学的操作盘
  • 温度范围-40°C至120°C
  • 与TRANS CAL 7281结合使用，可便携式且独立于网络使用
  • 选项：提供双量程版本

• Product data

  型号	8400-B001
  量程范围	0 … 1000 N 0 … 2000 N
  受力方向	压力
  标准化信号
  信号输出
  保护等级	IP 67
  过载保护
  拉盘
  受力压头
  使用温度范围	-30 ... +80 °C
  具体特点	非常扁平的设计 对作用于运行方向的力不敏感 易于更换，符合人体工程学的操作盘 温度范围-40°C至120°C 与TRANS CAL 7281结合使用，可便携式且独立于网络使用 选项：提供双量程版本

• Description

  With its flat construction this force sensor is specially designed to be fitted to a pedal. By this, the operator's forces for each respective action, for example brake tests, can be measured directly and the reaction of the vehicle or machine can be designated. This applies to real test drives, as well as in driving simulators. Due to the special construction of the membrane, it is irrelevant whether an upright or hanging pedal is concerned. The sensor is designed in a way that unavoidable lateral forces have as little impact on the measurement result as possible. Using a central internal thread on the control surface, various machine-related adaptor parts can be easily mounted. Because the pedal is convex-shaped on its surface, the pedal force sensor has a very rigid base plate and therefore can easily be applied to various geometrics. The mounting can even take place on a pedal with an elastomer covering.

  With a height of only 17 mm, this sensor is particularly flat and, in its assembled state, does not interfere with the operation task of the pedal. Additionally, its diameter of less than 60 mm makes this sensor suitable for almost all forms of pedals. The sensor is screwed together in a safe and stable way with a suitable bracket which goes under the pedal. Due to various pedal designs, this bracket is not included in the delivery scope and has to be manufactured separately to fit to the pedal. The connection cable is specially protected, it sturdily holds using PG cable glands and is suitable for robots: Therefore lots of movements in realistic, dirty and damp areas are guaranteed. On the measurement membrane in addition to its stable mechanics several bridges formed by strain gauges protect the sensor from additional transverse forces. The operator provides, from personal factors such as foot position, habits or various shoes, inevitably off-centre forces on the operating part of the sensors, which need to be compensated.

• Downloads

  Data sheet

  8400

  EN

Related products

8431,8432系列