对于可以转换为位移的线性位移和机械值,集成放大器,高输出电压,输入和输出电隔离,无滞后,反向电压保护
型号 | 87350 |
量程范围 | 0 … ± 1.27 mm 0 … ± 2.54 mm 0 … ± 6.35 mm 0 … ± 12.70 mm 0 … ± 25.40 mm 0 … ± 50.80 mm 0 … ± 76.20 mm |
信号输出类型 | |
保护等级 | |
工作温度 | |
激励供电电压 | |
复位弹簧 | |
具体特征 |
Linear displacements and mechanical values which can be converted to displacements (e.g. compressive and tensile force, strain, torque and vibration) may be measured by these DC/DC displacement sensors. The probe tip of these sensors is pushed onto the measuring object by a spring. This makes it possible to use these sensors were a mechanical modification of the measurement object (mounting hole) is not allowed or difficult. An integrated maintenance-free electronic and a high-level DC output signal provide an easy handling without any problems.
Output voltage as function of the displacement with the impedance as parameter.
Sensors of series 87350 generally consist of an oscillator, a demodulator and a transformer with moveable core. They are energized by DC voltage. The oscillator uses this DC voltage to generate the carrier frequency, which is needed for the operation of the sensor. Dependent on the position of the core, which is made of ferromagnetic material, voltages are induced by the two secondary coils of the transformer. These voltages will be demodulated, filtered and switched against each other. The result is, if the core is in its centre position, a 0 V output. Each other position of the core causes a DC voltage on the sensor’s output terminal. This output voltage is proportional to the linear deflection of the core.
Input and output terminals of these sensors are galvanically separated from each other, a connection to the sensor’s housing does not exist.
Please notice that there is a limit of 5 products for the product comparison.
Your latest selection was canceled.
×
波司特精密仪器(上海)有限公司
上海市静安区武定路327号1号楼1604室
CHINA
联系方式:
电话: (+86) 021-62365228,52048101
传真: (+86) 021-60853110
E-Mail: info@bursterchina.com
公司简介
burster总部位于德国巴登 - 符腾堡州。 半个多世纪以来一直致力于精密,高质量的测量方案的提供,现已成为高精密电阻、电阻测试仪、校准器、传感器信号处理和过程监控的精密仪器,传感器和系统最重要的供应商之一。作为一家ISO9001认证企业,所有产品均取得CE认证,拥有欧洲DKD高品质认证实验室。
burster为德国乃至全球的7500多家客户提供服务。 burster的创新和经验丰富的团队为这些客户提供了密集的应用支持。 解决复杂的测量问题并将测量和测试技术集成到生产环境中,用于生产控制,质量保证和测试设备监控,是该业务的日常仪表任务。
秉持着“精准、优质、通用”的产品发展核心理念,burster的产品和服务在汽车制造业、机器人制造业、自动化装配、线缆制造业、电阻制造/检测、计量认证机构等领域获得了越来越多国际知名企业的青睐和支持。