8511系列拉压力传感器

高精度,安装方便,简单的力引入,用于拉伸和压缩,用于静态和动态测量,材料铝和铝。 不锈钢,防护等级IP 64

  • Features

    • 量程范围小,从 0 ... 5 N 到 0 ... 2kN
    • 可测拉力和压力
    • 部分型号精度可达0.1%F.S.
    • 材质铝或不锈钢
    • 小巧的外形设计
    • 安装十分方便
  • Product data

    型号 8511
    量程范围 0 … 5 N
    0 … 10 N
    0 … 20 N
    0 … 50 N
    0 … 100 N
    0 … 200 N
    0 … 500 N
    0 … 1000 N
    0 … 2000 N
    受力方向 压力和压力
    标准化信号 可选配
    信号输出 1 mV/V 1.5 mV/V 取决于量程范围
    保护等级 IP54
    过载保护 No
    拉盘 No
    受力压头 No
    使用温度范围 -30 ... +90 °C
    具体特点
    • 量程范围小,从 0 ... 5 N 到 0 ... 2kN
    • 可测拉力和压力
    • 部分型号精度可达0.1%F.S.
    • 材质铝或不锈钢
    • 小巧的外形设计
    • 安装十分方便
    • Description

      Model 8511 bending beam load cells are designed for measuring tension and compression forces. Their high accuracy, low torque sensitivity and very low mounting height make these sensors particularly suitable for use in weighing and dosing technology as well as for laboratory and production use.

      Extremely simple force application makes the sensor easy to handle. It offers a very favorable price/performance ratio and can be used universally for static and dynamic measurements.

      Examples of application:

          Dosing system
          Load deflection curve
          Tension force measurement for wire or thread winders
          Friction forces
          Cable force
          Withdrawal force, etc

      The measuring element of this load cell consists of a double bending beam with strain gauges, the resistance of which changes with the application of force. Upon applying a voltage to the strain gauge bridge, the change in the strain gauge resistance is converted into output voltage, which is directly proportional to the force. The strain gauges and the entire measuring element are protected from water spray by rubber bellows.

      To install the load cell, it is securely clamped on the side with 2 bore holes. The tension or compression force to be measured is applied at the other end. Force is applied easily perpendicular to the sensor axis. This serves to prevent falsification of the measured values. The influence on the measuring signal resulting from the increase of load distance on the mounting side (e.g. by a touch finger) is negligible. Overload protection can be realized with little effort using a mechanical stop.

    • Downloads

      Data sheet
      pdf 8511参数资料
      Operation manual
      pdf 8511使用手册

    Related products

    Product comparison

      © 2020 波司特精密仪器(上海)有限公司 沪ICP备12015704号沪公网安备31010602000957号