坚固,精确,高分辨率,免维护,免接触式传输,集成放大器,极低的惯性矩
型号A | 88600 |
工作方式A | 电容式,无接触环 |
量程选择A | ± 40 ° 0 … + 80 ° 0 … - 80 ° ± 80° 0 … + 160 ° 0 … - 160 ° |
信号输出A | 100 mV/° or 50 mV/°
|
保护等级A | IP40 |
工作温度A | 0 ... +75 °C |
供电电压A | 15 V DC |
电气连接A | Connector 5 pin |
可否连续旋转A | Yes |
位移速度A | 1440°/s |
具体特点A |
|
The 88600 series combines the precision of expensive optical angle encoders with high resolution and an analog output, without being subject to the restricted applications of potentiometric angle sensors.
Typical applications:
This capacitive DC/DC angle displacement sensor with integrated amplifier only requires a DC voltage for a power supply and delivers an output voltage that is proportional to the angular position of the shaft. The shaft can be turned clockwise or counterclockwise with a permissible angular speed of up to 18,000 °/s (option).
A highly accurate differential rotary capacitor is used to convert the angle into an electrical voltage. The integrated electronics consists of an oscillator, demodulator and amplifier. It can display the measurement signal directly or can, for instance, pass it to process monitoring equipment.
Power supply and transmission of measured signals is without contact within the sensor. Operation is therefore maintenance-free. The precision roller bearings used give the sensor a long service life.
Parts that are important for the function are made from material with no internal stresses and protected against corrosion.
Mounting instructions
The three threaded holes on the front plate (shaft side) allow the sensor to be mounted in any position. To determine the angular position of the measuring range, the shaft has a reference groove and the front face a reference hole (see rear).
Please notice that there is a limit of 5 products for the product comparison.
Your latest selection was canceled.
×
波司特精密仪器(上海)有限公司
上海市静安区武定路327号1号楼1604室
CHINA
联系方式:
电话: (+86) 021-62365228,52048101
传真: (+86) 021-60853110
E-Mail: info@bursterchina.com
公司简介
burster总部位于德国巴登 - 符腾堡州。 半个多世纪以来一直致力于精密,高质量的测量方案的提供,现已成为高精密电阻、电阻测试仪、校准器、传感器信号处理和过程监控的精密仪器,传感器和系统最重要的供应商之一。作为一家ISO9001认证企业,所有产品均取得CE认证,拥有欧洲DKD高品质认证实验室。
burster为德国乃至全球的7500多家客户提供服务。 burster的创新和经验丰富的团队为这些客户提供了密集的应用支持。 解决复杂的测量问题并将测量和测试技术集成到生产环境中,用于生产控制,质量保证和测试设备监控,是该业务的日常仪表任务。
秉持着“精准、优质、通用”的产品发展核心理念,burster的产品和服务在汽车制造业、机器人制造业、自动化装配、线缆制造业、电阻制造/检测、计量认证机构等领域获得了越来越多国际知名企业的青睐和支持。