8512系列S型拉压力传感器

高精度,非常扁平的设计,简单的力施加,用于拉伸和压缩,许多负载循环,用于静态和动态测量,防护等级IP 64

  • Features

    • 量程范围小,从 0 ... 20N 到 0 ... 880N
    • 可测拉力和压力
    • 精度 0.1%F.S.
    • 出色的性价比
    • 小巧的外形设计
    • 安装十分方便
  • Product data

    型号 8512
    量程范围     

    0 … ±20 N
    0 … ±50 N
    0 … ±100 N
    0 … ±220 N
    0 … ±440 N
    0 … ±880 N
    受力方向 压力和压力
    标准化信号 No
    信号输出 2 mV/V 3 mV/V 取决于量程范围
    保护等级 IP54
    过载保护 可选配
    拉盘 No
    受力压头 No
    使用温度范围 -40 ... +80 °C
    具体特点
    • 量程范围小,从 0 ... 20N 到 0 ... 880N
    • 可测拉力和压力
    • 精度 0.1%F.S.
    • 出色的性价比
    • 小巧的外形设计
    • 安装十分方便
    • Description

      Model 8512 bending beam load cells are designed for measuring tension and compression forces. Their high accuracy, low torque sensitivity and thanks to the very flat design make these sensors particularly suitable for use in weighing and dosing technology as well as for laboratory and production use.

      Extremely simple force application makes the sensor easy to handle. It offers a very favorable price/performance ratio and can be used universally for static and dynamic measurements.

      Examples of application:

      • Dosing system 
      • Automated tool testing
      • Tension force measurement for wire or thread winders
      • Test and analysis systems in the pharma industry
      • Withdrawal force
      • Measuring loads in cable systems

      The measuring element of this load cell consists of a double bending beam with strain gauges, the resistance of which changes with the application of force. Upon applying a voltage to the strain gauge bridge, the change in the strain gauge resistance is converted into output voltage, which is directly proportional to the force. The strain gauges and the entire measuring element are protected from water spray by metal cover including sealing material.

      The tensile or compressive load to be measured is applied to the sensor element through the M6 threaded hole located on each end face. The load can be applied easily, along the sensor axis. This serves to prevent falsification of the measured values. Overload protection can be realized with little effort using a mechanical stop.

    • Downloads

      Data sheet
      pdf 8512参数资料

    Related products

    Product comparison

      © 2020 波司特精密仪器(上海)有限公司 沪ICP备12015704号沪公网安备31010602000957号