86403、86413、86423系列扭矩传感器

尺寸小,可靠,精度高,可旋转,可承受左右扭矩,可进行静态和动态测量,传递滑环

  • Features

    •     量程范围 从0 ...±1N·m 到 0 ... ±1000 N·m
    •     重现性好
    •     标准化的输出信号,方便更换
    •     可选配出厂校准证书
    •     可用于顺时针和逆时针扭矩测量
    •     可选配集成角度测量
    •     转速最高可达3000 rpm
  • Product data

    型号T 86403, 86413, 86423
    工作方式T 旋转
    量程选择T 86403
    0 … ± 1 Nm
    0 … ± 2 Nm
    0 … ± 5 Nm
    0 … ± 12 Nm
    0 … ± 25 Nm
    0 … ± 63 Nm
    0 … ± 160 Nm
    0 … ± 500 Nm
    0 … ± 1000 Nm 86413
    0 … ± 1 Nm
    0 … ± 2 Nm
    0 … ± 5 Nm
    0 … ± 10 Nm
    0 … ± 20 Nm
    0 … ± 50 Nm
    0 … ± 100 Nm
    0 … ± 200 Nm
    0 … ± 500 Nm 86423
    0 … ± 1 Nm
    0 … ± 2 Nm
    0 … ± 5 Nm
    0 … ± 10 Nm
    0 … ± 20 Nm
    信号输出T 86403 & 86413
    0.5 mV/V
    2 mV/V
    取决于量程范围 86423
    0.5 mV/V
    1 mV/V
    2 mV/V
    取决于量程范围
    第二量程比例T No
    机械连接T 86403
    Internal and external square acc. to DIN 3121 86413
    Keyways on both shaft ends 86423
    Hexagon head and socket 1/4'' acc. to DIN 3126
    保护等级T IP50
    使用温度T -10 ... +60 °C
    集成速度测量T 86403 & 86413
    可选配 86423
    No
    集成角度测量T 86403 & 86413
    可选配 86423
    No
    编码器增量T 360个脉冲转
    最大转速T ≤ 2000 rpm
    信号传输方式T 滑环传动系统
    具体特征T
    • 出色的重现性
    • 标准化的输出信号使更换变得容易
    • 设计用于顺时针和逆时针扭矩
    • 转速最高可达3000 min-1(短期)
  • Description

    Precise, reliable measurements of both static and dynamic torques in either direction can be made with this range of sensors.

    This opens a wide range of possible applications to the user. These torque sensors are standard equipment in a wide range of industrial automation, quality control and automotive components industry applications, as well as in laboratories.

    Typical applications:

    Screwing technology

    • Checking and adjusting bolting tools such as torque limiting wrenches, screwdrivers
    • Testing bolted connections

    Measuring the drag torque of motors and pumps

    • Frictional torques of gears, bearings and seals
    • Testing torsion springs
    • Adjusting equipment in the automobile industry
      (sunroof, power windows etc.)

    Strain gauges are mounted on the torsion shaft of the sensor element, itself made of steel, connected to form a full bridge. The electrical power excitation for the wire strain gauge full bridge and the transmission of the measured signal is provided through a high-quality slip-ring system between the stator and the rotor.

    For a clockwise torque, the measurement signal is positive, and it is negative for a counterclockwise torque.

    The sensor for the optionally available angle measurement for the square shaft versions is fitted with an additional pulse-generating disk.

    With the aid of a second encoder track, displaced by 90°, allows the subsequent evaluation units to perform 4-fold edge evaluation. This allows significantly improved resolution to be achieved. The offset track makes it possible to detect the direction of the rotation.

    The characteristic parameters for the sensors are standardized in order to reduce the effort required to check a connected amplifier or to exchange the sensor.

  • Downloads

    Data sheet
    pdf 86403_86413_86423技术参数
    Operation manual
    pdf 86403_86413_86423使用手册

Related products

Product comparison

    © 2020 波司特精密仪器(上海)有限公司 沪ICP备12015704号沪公网安备31010602000957号